Tank and Reservoir Options

A power up and gravity down assembly featuring an all-cast iron valve body with a chrome spool and a high-quality relief set to 3600 psi.

It is mounted on a 50-quart reservoir with a 10-micron strainer, 1 1/4" pipe thread outlet.

Can be operated with the 130-016 push pull cable or upgraded to air operation. Our 120-284 toggle air kit has everything you need to install the air system including a toggle switch in the cab and air lines.

This is the standard valve tank combo in all our LL 1000 thru LL3000 hoists packages.

This double valve  systems are designed for operating a hoist and a dump gate, auger, or any other reason a second valve would be required. The first valve is our power up and gravity down valve set at 3600 psi.  The second valve is power up and down with the pressure set at 1500 psi both directions. 

These valves also feature an all-cast iron valve body with a chrome spool for long life and durability. Mounted on a 60-quart reservoir with a 10-micron strainer, 1 1/4" pipe thread outlet.

Can be operated with the 130-016 push pull cable or upgraded to air operation. Our 120-284 toggle air kit has everything you need to install the air system including a toggle switch in the cab and air lines.

With Pressures set at 3250 psi up and down it is also the perfect choice for retrofitting, or any rebuild.

For LL 1000 thru LL3000   hoists packages.

Gear Pump 

USED ON THE LL650 THRU LL3000 

DISPLACEMENT GEAR SIZE 2.36

10 TO 30 GALLONS PER MINUTE 

DO NOT SPIN THIS PUMP SLOWER THAN 900 RPM OR FASTER THAN 3000 DAMAGE TO PUMP WILL OCCUR THAT IS NOT COVERED BY WARRANTY.

Tafco would like to see this pump running about 1800 rpms to get 18 gpm. Do not forget your pto speed and engine rpm are not the same thing. Pto’s run anywhere from 85 to 140% of engine speed.

Pressure 3250 PSI

Shaft size 7/8" - 13 spline

Flange 2 bolt SAE “B” flange